HP B6960-90078 manual Reconnect Broken Connections, Object Options

Backup

Using Backup Options

	See “Pre- and Post- Exec Commands on Windows Systems” on page 251
	for details of specifying post-exec commands on Windows.
	See “Pre- and Post- Exec Commands on UNIX Systems” on page 257 for
	details of specifying pre-exec commands on UNIX.
	See Appendix, “Examples of Pre-Exec and Post-Exec Commands for
	UNIX,” on page A-20 for some sample scripts on UNIX.
	Default value is not specified.
	Reconnect Broken Connections
	When this option is set, Data Protector reconnects the Backup Session
	Manager and Disk Agents or Media Agents in the event of short-term
	network problems. Otherwise, the session is aborted.
	This setting is useful if you have the Cell Manager on one LAN and Disk
	Agents or Media Agents on another. Assuming that the connection
	between these two LANs is unreliable (WAN connections), Data
	Protector tries to reconnect for 1200 seconds. This can be set in the
	omnirc variable OB2RECONNECT_RETRY.
	The default value is OFF.
	Object Options
Setting the	1. Select the backup specification and from the Options property page,
Filesystem	under Filesystem Options, click Advanced.
Options	2. Select the options to be set from the Options, Other, WinFS
	Options, or Netware Options tabs.
NOTE	On the Options tab, if specifying Pre- and/or Post- exec command names,
	you may or may not have to specify the full paths for the commands.
	See “Pre- and Post- Exec Commands on Windows Systems” on page 251
	for details of specifying pre-exec commands on Windows.
	See “Pre- and Post- Exec Commands on UNIX Systems” on page 257 for
	details of specifying pre-exec commands on UNIX.
	3. Click OK to confirm and exit this dialog box.
	See online Help for specific help on each option.

Chapter 5 239