HP B6960-90078 manual Backing Up Local Disks, About Backing Up Database Applications

		Integrations with Other Applications
		MC/ServiceGuard Integration
NOTE	When backing up a virtual host, the object ownership will acquire the
	ownership of the stationary host on which the cluster package is
	running. Therefore, when a failover occurs, the same object backup is
	showing a different ownership. To avoid this, set the ownership in the
	backup specification to the virtual host.
	Backing Up Local Disks
	To back up cluster local disks, proceed as follows:
	1.	Install and configure the Data Protector Disk Agent component on
		each cluster node that has the local disk(s) you want to back up.
	2.	Configure a backup specification for specific cluster node using the
		physical node name and select which of its local disks you want to
		back up.
	Backing Up Shared Disks
	To back up cluster shared disks, proceed as follows:
	1.	Install (locally) and configure the Data Protector cluster client
		software on all the cluster nodes. See the HP OpenView Storage Data
		Protector Installation and Licensing Guide for instructions.
	2.	Import cluster package to the Data Protector cell.
	3.	Configure a backup specification and select the virtual host. Define
		the shared disks you want to back up.

About Backing Up Database Applications

Information in this section is valid for backing up a database application running in the same cluster as the Cell Manager. The backup of the application fails if it runs on a different node than the Cell Manager. It is highly recommended to configure the application and the Cell Manager in the same package.

Chapter 13 639