HP B6960-90078 manual Modifying the Control File

Integrations with Other Applications

MC/ServiceGuard Integration

•SERVICE_NAME, SERVICE_FAIL_FAST_ENABLED , SERVICE_HALT_TIMEOUT

Enter the service information. For the service name, you can enter any name but note that you will use the same name in the control file afterwards. For example:

SERVICE_NAME omni_sv

SEVICE_FAIL_FAST_ENABLED NO SERVICE_HALT_TIMEOUT 300

•SUBNET

Enter the subnet of the cluster. For example:

SUBNET 10.17.0.0

8.Modify the Data Protector package control file (for example,

/etc/cmcluster/ob2cl/ob2cl.cntl). Refer to the example of this file in “Example of the Package Control File” on page A-38.

In this file, modify the following fields:

Modifying the Control File

•VG [n]

Specify the volume group used by this package. For example:

VG [0] = /dev/vg_ob2cm

•LV [n], FS [n], FS_MOUNT_OPT [n]

Specify the logical volume and filesystem mount information:

LV [0] = /dev/vg_ob2cm/lv_ob2cm FS [0] = /omni_shared FS_MOUNT_OPT[0]=” ”

•IP, SUBNET

Specify the IP and the subnet information used by this package. For example:

IP [0] = 10.17.3.230 SUBNET [0] = 10.17.0.0

•SERVICE_NAME, SERVICE_CMD, SERVICE_RESTART

Specify the service name, command, and restart parameters.

Chapter 13 635