ADIC/GRAU DAS and STK ACS Libraries

The ADIC/GRAU DAS Library Device

A list of available drives with corresponding DAS name of the drive.

If you have defined the DAS Clients for your ADIC/GRAU system, you can get this list with the following dasadmin commands:

dasadmin listd2 [client] or

dasadmin listd [client], where [client] is the DAS Client for which the reserved drives are to be displayed.

Dasadmin command can be called from the C:\DAS\BIN directory on the OS\2 host, or from the system directory: \winnt\system32

A list of available Insert/Eject Areas with corresponding format

 

 

specifications.

 

 

You can get the list of available Insert/Eject Areas in Graphical

 

 

configuration of AMS (AML Management Software) on OS\2 host:

 

 

1. Start this configuration from the menu Admin ->

 

 

Configuration.

 

 

2. Open the EIF-Configurationwindow by double-clicking the

 

 

I/O unit icon, and then click the Logical Ranges field.

 

 

In the text box the available Insert/Eject Areas are listed.

 

 

NOTE

One Data Protector library device can handle only one media type.

 

It is important to remember which media type belongs to each one of the

 

specified Insert and Eject Areas, because you will need this data later for

 

configuring Insert/Eject Areas for the Data Protector library.

 

A list of SCSI addresses for the drives. For example, scsi4:0:1:0.

 

Remote

The installation procedure consists of these steps:

Installation

1.Distribute the DAS Agent component to clients using the Data Protector graphical user interface and Installation Server.

2.Physically connect the library drives and robotics to the systems where you have installed the DAS Agent software.

See http://www.openview.hp.com/products/datapro/spec_0001.html for details about supported ADIC/GRAU libraries.

Chapter 14

665

Page 695
Image 695
HP B6960-90078 manual Remote, Installation