HP B6960-90078 manual FSMOUNTOPT0= # Filesystem Unmount Count

Further Information

Example of the Package Control File

#filesystem will be fsck'd prior to being mounted. The filesystems will be

#mounted in the order specified during package startup and will be unmounted

#in reverse order during package shutdown. Ensure that volume groups

#referenced by the logical volume definitions below are included in

#volume group definitions above.

#

#LV[0]=""; FS[0]=""; FS_MOUNT_OPT[0]=""

LV[0]=/dev/vg_ob2cm/lv_ob2cm

FS[0]=/omni_shared

FS_MOUNT_OPT[0]=""

#FILESYSTEM UNMOUNT COUNT

#Specify the number of unmount attempts for each filesystem during package

#shutdown. The default is set to 1.

FS_UMOUNT_COUNT=2

#IP ADDRESSES

#Specify the IP and Subnet address pairs which are used by this package.

#Uncomment IP[0]="" and SUBNET[0]="" and fill in the name of your first

#IP and subnet address. You must begin with IP[0] and SUBNET[0] and

#increment the list in sequence.

#

#For example, if this package uses an IP of 192.10.25.12 and a subnet of

Appendix A A-41