ADIC/GRAU DAS and STK ACS Libraries

The ADIC/GRAU DAS Library Device

Enter the Device Name and, below, Description.

In the Client text box choose the DAS Media Agent client from the list that will access ADIC/GRAU robotics.

Choose the GRAU DAS Library in the Device type text box. In the DAS Server enter the hostname of the DAS Server (obtained information during installing DAS Agent).

Choose preferred action from the list for the Busy Drive situation. Insert the Import and Export Areas for the media type this Data Protector library is configured for (obtained information during installing DAS Agent).

Choose appropriate Media Type from the list.

Using Data Protector to Configure Drives

Create a library for each type of media that you will use with Data Protector. The steps to add a drive to a ADIC/GRAU library are as follows:

Switch to the Devices & Media context. Choose created device, right-click Drives, and then Add Drive. Enter the Device Name and

Description.

In the Client text box enter the hostname where the ADIC/GRAU media device is connected.

In Data Drive enter the SCSI address of the device.

In the Drive Name enter the ADIC/GRAU Drive name you remembered during installing the DAS Agent. Select the appropriate Media Pool you created for this Drive.

Select Advanced Options to change Concurrency and other settings as necessary. Note that the Force Direct Library Access option is not selected by default. Turn this option off when choosing the indirect library robotics access configuration (for more information, see the following section, “Indirect Access to the DAS Library: Installation and Configuration”).

Indirect Access to the DAS Library: Installation and Configuration

This section focuses on the indirect access configuration.

670

Chapter 14

Page 700
Image 700
HP B6960-90078 manual Using Data Protector to Configure Drives, 670