HP B6960-90078 manual Swsource section, 500

	Disaster Recovery
	Manual Disaster Recovery of an HP-UX Client
	core.cfg to archive_<name>.cfg:
	cp /opt/ignite/data/examples/core.cfg
	/var/opt/ignite/data/<OS_Release>/archive_<name>.cfg
Example	cp /opt/ignite/data/examples/core.cfg
	/var/opt/ignite/data/Rel_B.11.11/archive_HPUX11_11_DP50_C
	L.cfg
	5. Check and change the following parameters in the copied
	configuration file:
	• In the sw_source section:
	load_order = 0
	source_format = archive
	source_type="NET"
	# change_media=FALSE
	post_load_script = "/opt/ignite/data/scripts/os_arch_post_l"
	post_config_script =
	"/opt/ignite/data/scripts/os_arch_post_c"
	nfs_source = "<IP Target System>:<Full Path>”
	• In the matching OS archive section:
	archive_path = "<archive_name>.gz
	6. Determine the “impacts” entries by running the command
	archive_impact on your image file and copy the output in the same
	“OS archive” section of your configuration file:
	/opt/ignite/lbin/archive_impact –t –g
	<archive_name>.gz
Example	/opt/ignite/lbin/archive_impact –t –g
	/image/archive_HPUX11_11_DP50_CL.gz
	impacts = "/" 506Kb
	impacts = "/.root" 32Kb
	impacts = "/dev" 12Kb
	impacts = "/etc" 26275Kb
	impacts = "/opt" 827022Kb
	impacts = "/sbin" 35124Kb

500 Chapter 10