HP B6960-90078 manual

ADIC/GRAU DAS and STK ACS Libraries

The ADIC/GRAU DAS Library Device

dasadmin listd [client], where [client] is the DAS Client for which the reserved drives are to be displayed.

Dasadmin command can be called from the C:\DAS\BIN directory on the OS\2 host, or from the system directory: /usr/local/aci/bin directory.

✓ A list of available Insert/Eject Areas with corresponding format

		specifications.
		You can get the list of available Insert/Eject Areas in Graphical
		configuration of AMS (AML Management Software) on OS\2 host:
		1. Start this configuration from the menu Admin ->
		Configuration.
		2. Open the EIF-Configurationwindow by double-clicking the
		I/O unit icon, and then click the Logical Ranges field.
		In the text box the available Insert/Eject Areas are listed.
NOTE	One Data Protector library device can handle only one media type.
	It is important to remember which media type belongs to each one of the
	specified Insert and Eject Areas, because you will need this data later for
	configuring Insert/Eject Areas for the Data Protector library.
	✓	A list of UNIX device files for the drives.
		Run the ioscan -fnsystem command on your system to display
		the required information.
Remote	The installation procedure consists of these steps:

Installation

1.Distribute the DAS Agent component to clients using the Data Protector graphical user interface and Installation Server.

2.Physically connect the library drives and robotics to the systems where you have installed the DAS Agent software.

See http://www.openview.hp.com/products/datapro/spec_0001.html for details about supported ADIC/GRAU libraries.

At this stage, you should have your hardware connected and your DAS software properly installed. Run the following command to check whether or not the library drives are properly connected to your system:

•/opt/omni/lbin/devbra -dev

Chapter 14 667