Backup

Using Backup Options

See “Pre- and Post- Exec Commands on Windows Systems” on page 251 for details of specifying pre-exec commands on Windows.

See “Pre- and Post- Exec Commands on UNIX Systems” on page 257 for details of specifying pre-exec commands on UNIX.

Figure 5-32 Disk Image Options

5. Click OK to confirm and exit the dialog box.

Setting the Object Specific Options

1.Select the backup specification whose options you want to set.

2.Select the Backup Object Summary property page.

3.Right-click the backup object, then select Properties. The contents of the Object Properties window depend on the type of backup object you selected. This can be a UNIX filesystem, a Windows filesystem, or a UNIX disk image.

The Object Properties window for a Windows filesystem contains the General, Options, Other, Trees/Filters, and the WinFS Options tabs. Options, Other, and WinFS Options are the same as shown in Figure 5-31, while General and Trees/Filters are shown in Figure 5-33.

Chapter 5

241

Page 271
Image 271
HP B6960-90078 manual Disk Image Options, Setting the Object Specific Options