HP B6960-90078 manual This Chapter, 656

NOTE

ADIC/GRAU DAS and STK ACS Libraries

In This Chapter

In This Chapter

This chapter assumes that you have already physically configured the ADIC/GRAU or STK library. If you have not done so, refer to the documentation that comes with the ADIC/GRAU or STK library for instructions on configuring the library. For a list of supported DAS software versions, refer to HP OpenView Storage Data Protector Software Release Notes.

This chapter has been divided into three sections: an overview of general concepts, the ADIC/GRAU DAS library, and the STK ACS library. The first section covers concepts common to both libraries, including diagrams of both library configurations with Data Protector, and media management basics. The next section provides detailed instruction on installing and configuring the ADIC/GRAU library, and the last section provides detailed instruction on installing and configuring the STK ACS library. The ADIC/GRAU and STK library sections are structured in the following order:

“ADIC/GRAU DAS and STK ACS Integrations” on page 657.

“The ADIC/GRAU DAS Library Device” on page 662.

“The STK ACS Library Device” on page 680.

“Troubleshooting Library Installation and Configuration” on page 697.

The ADIC/GRAU and STK functionality is subject to specific Data Protector licenses. See the HP OpenView Storage Data Protector Installation and Licensing Guide for details.

656 Chapter 14