ADIC/GRAU DAS and STK ACS Libraries

Troubleshooting Library Installation and Configuration

(or: dasadmin dismount -d <DRIVENAME>)

where <AMUCLIENT> = DATA_PROTECTOR

and <VOLSER> for example = 001565

and <DRIVENAME> is for example = DLT7001

and "all" stands for "allocate"

If you are not successful with these commands (communication to DAS Server (OS/2), try to execute these commands on the OS/2 PC. You can find the dasadmin command in/das/bin/.

If you execute theses commands from the OS/2 PC, use <AMUCLIENT> =

AMUCLIENT.

1.Login to the AMU client. The common login are the following: user: Administrator pwd: administrator

user: Supervisor pwd: supervisor

2.It may be necessary to set the media type:

set ACI_MEDIA_TYPE set ACI_MEDIA_TYPE=DECDLT

3.To reboot the library, proceed as follows: Shutdown OS/2 and then switch off robotics.

Restart OS/2 and when OS/2 is ready, the AMU log will display that the robotics is not ready. Then, switch on robotics.

How to Configure You can only move media from the CAP to a slot and then to a drive,

GRAU CAPs? using the device’s robotics. You have to use import and export commands. For example:

import CAP: I01

import CAP range: I01-I03

export CAP: E01

export CAP range: E01-E03

How to Use uma The following syntax is used when you use the Data Protector uma utility

Utility?to manage the GRAU and STK library drives:

uma -pol 8 -ioctl grauamu

pol 8 for GRAU

698

Chapter 14