Disaster Recovery

Manual Disaster Recovery of an HP-UX Client

impacts = "/stand" 1116Kb impacts = "/tcadm" 1Kb impacts = "/usr" 729579Kb impacts = "/var" 254639Kb

7.To make Ignite-UX aware of the new created depot, add an cfg entry to the /var/opt/ignite/INDEX file with the following layout:

cfg "<This_configuration_name>" {

description "<Description of this configuration>” "/opt/ignite/data/<OS>/config"

"/var/opt/ignite/data/<OS>/ archive_<name>.cfg

}

Example

cfg "HPUX11_11_DP50_Client" {

 

description "HPUX 11.i OS incl Patches and DP50 Client"

 

"/opt/ignite/data/Rel_B.11.11/config"

"/var/opt/ignite/data/Rel_B.11.11/archive_HPUX11_11_DP50_CL.cfg

"

}

8.Make sure that one or more IP addresses reserved for booting clients are configured in the /etc/opt/ignite/instl_boottab file. The number of IP addresses is equal to the number of parallel booting clients.

After the above described procedure is completed, you have a Golden Image of an HP-UX client (with a specific hardware and software configuration), which can be used to recover any client of a similar layout.

You have to repeat these steps to create a Golden Image for all systems with different hardware and software configuration.

Chapter 10

501

Page 531
Image 531
HP B6960-90078 manual