HP B6960-90078 Cell Manager on Microsoft Cluster Server, Clients on Microsoft Cluster Server, 618

	Integrations with Other Applications
	Microsoft Cluster Server Integration
	Cell Manager on Microsoft Cluster Server
	The Data Protector Cell Manager can be installed on the 32-bit Microsoft
	Cluster Server. This enables an automatic migration of the Data
	Protector services from one cluster node to another in case of failover.
Installation	See the HP OpenView Storage Data Protector Installation and Licensing
	Guide for more information on how to install Data Protector cluster Cell
	Manager.
	After setup finishes, the Data Protector cluster cell has the following
	systems automatically added:
	• All cluster nodes
	• All cluster virtual servers
	Clients on Microsoft Cluster Server
	Data Protector can back up a full cluster (local and shared disks) and
	applications running in a cluster environment.
Installation	To back up a cluster-aware application the Data Protector client software
	must be installed locally on all the cluster nodes. See the HP OpenView
	Storage Data Protector Installation and Licensing Guide for information
	on how to install a cluster-aware client.
Configuration	After the installation, virtual server hostname of the client must be
	imported to the Data Protector cell. See the Figure 13-2 on page 619 and
	the HP OpenView Storage Data Protector Installation and Licensing
	Guide for instructions.
NOTE	If you want an application backup to be cluster-aware, that is, access it
	through its virtual server, also this application integration module has to
	be installed on each application preferred owners (nodes). Only this way
	the Data Protector integration agents can start on cluster nodes where
	the application currently resides.

618 Chapter 13