HP B6960-90078 manual Setting Up MoM Manager, Importing Data Protector Cells

TIP

IMPORTANT

Manager-of-Managers Environment

Configuring the Manager-of-Managers

Setting Up MoM Manager

To set up an enterprise environment, configure one of your Cell Managers as a MoM Manager.

1.In the Data Protector Manager, click Clients in the Context List.

2.In the Actions menu, click Configure CM as Manager-of-Managers Server.

3.Stop and restart Data Protector services. Refer to the section “Restarting Data Protector Services” on page 364.

On Windows, you can also use the Control Panel to stop the Data Protector services. See “Setting the User Account for the Data Protector Inet Service” on page 187 for details.

4.Run the MoM graphical user interface:

•On Windows: from the Start menu select

Manager-of-Managersin the HP OpenView Storage Data Protector program group.

•On UNIX: run the /opt/omni/bin/xomnimom command.

Importing Data Protector Cells

Once you have configured the MoM Manager, you can start adding (importing) the Data Protector cells to the MoM environment. To import a Data Protector cell to the MoM environment, proceed as follows:

1.In the Data Protector Manager-of-Managers, click Clients in the Context List.

2.Right-clickEnterprise Clients, and then click Import Cell Manager.

In order to import a Cell Manager into the MoM as an Enterprise Client, you must be a member of the admin user group on that Cell Manager. If you are not, the import will fail.

Chapter 8 363