6Chapter 1 Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO Color Monitor.

1-1. Features

• 22” wide format LCD (CG223W) / 24” wide format LCD (CG243W)
• Wide color gamut of 95% of Adobe RGB (CG223W) / 98% (CG243W)
• Applicable to the resolution of 1680 dots x 1050 lines (CG223W) / 1920 dots x 1200 lines (CG243W)
• HDCP (High-bandwidth Digital Conte nt Protection)
• Frame Synchronous mode supported : 47.5 - 61Hz (CG223W)
: 23.75 - 30.5Hz, 47.5 - 61Hz (CG243W)
• Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)
• 3 signal input terminals (DVI-I x 2, Di splayPort x 1)
• Color Mode function reproduces color gamut and gamm a compliant with [EBU/REC.709/SMPTE-C]
broadcasting standards a s well as the [DCI] digital cinema standard
“2-3. To select the display mode (Color Mode)” (page 18)
• Attaching the “Adjustment Certicate” to descr ibe the grayscale and uniformity cha racteristics of the
monitor individually
• Portrait/Landscape d isplay available (rotate 90 degrees clockwise)
• Monitor hood attached
• The provided “ColorNavigator” calibration software enables you to calibrat e monitor characteristics
and generate color proles
“1-3. Utility Disk” (page 8)
• Color Vision Deciency Simulation Software "UniColor Pro" supported
This software can be down loaded from http://www.eizo.com
• Power saving function
This product is equipped w ith power saving function.
-Power Consumption when main power switch is Off: 0W
Equipped with main power switch .
Turning off the main power switch completely shuts of f power supply to the monitor while the monitor is not
used.
-Auto EcoView function
The sensor on the front side of the monitor de tects the environmental b rightness to adjust the scree n brightness
automatically and comforta bly.
Excessively high brightness may lead a da mage to the natural envir onment as well as to your eyes. Suppressing
the excessively high brightness wil l be helpful to reduce the power consumpt ion and the damage to your eyes.
“4-3. Setting Monitor’s Automatic Brightness Adjustment ” (page 30)
NOTE
• Th is monitor supports the Port rait/Landscape display. This f unction allows you to change the orientat ion of the
Adjustment menu when using the monitor s creen in vertical display position. ( Refer to “To set the orientation of
the Adjustment menu [Orientation]” on page 26.)
• For using t he monitor with “Portrait” posit ion, the graphics board suppor ting portrait display is re quired. When
using the monitor with “Port rait” position, the setting ne eds to be changed depending on t he graphics board used
in your PC. Refer to the manual of the graph ics board for details.