37
Chapter4SelfCalibration
●Setting calibration schedule

Set the calibration schedule for SelfCalibration.

Attention
• Clock adjustme nt is necessary for SelfCalibr ation to operate.

Procedure

1. Choose “SelfCal ibration” from the Adjustment menu, and press .

2. Choose “Sett ings” from “SelfCalibration”, and press .

3. Choose “Schedule” f rom “Settings”, and press .

The schedule setting menu appear s.

4. Use or to select the items to change, and press .

Settings Setting

StartingTime Off SelfCalibrationisnotexecuted. Setthetimingatwhich
SelfCalibrationisexecuted.
PowerSave Tobeexecutedunderanyofthe
followingconditions.
• Themonitorisinthepower
savingmodeorthepower
isturnedoffwhenthetime
periodsetinthescheduleis
reached(“Type-1”or“Type-
2”).
• Themonitorshiftstothe
powersavingmodeorthe
poweristurnedoffwhen
thetimeperiodsetinthe
schedulehaselapsed.
Immediately Whenthetimeperiodsetin
theschedulehaselapsed,itis
executedimmediately.
SettingType*1 Type1 inmonths Setaccordingtothefrequencyat
whichSelfCalibrationisexecuted.
Type2 inweeks
Type3 inhours(monitorusagetime)
Interval Type1 1-12months Settheintervalbetweenthe
completedSelfCalibrationandthe
nextexecution.Thesettingdetails
differdependingonthetypeof
“SettingType”specied.
Type2 1-5weeks
Type3 50-500hours
Week(s) 1stweek-5thweek Setwhichweektoexecute
SelfCalibrationonforthemonthin
whichcalibrationisexecuted.
Day SUN/MON/TUE/W ED/THU/FRI/SAT Setwhichdaytoexecute
SelfCalibrationonfortheweekin
whichcalibrationisexecuted.
Time 00:00-23:30 SetthetimeatwhichSelfCalibration
isexecuted.
*1 Settings that are used freq uently can be preset.

5. Use or for adjustment.

6. Press to exit.

The calibration schedule is set.
Note
• When the st arting time is “Im mediately”, and the setting ty pe is either “Type1” or “Type2”, SelfCalibration is
executed according to schedule even if the power is sw itched off using .
• When the st arting time is “Off ”, the SelfCalibration menu shows “Set ting incomplete.” However, SelfCalibration can
be executed manually.