38 Chapter4SelfCalibration
●Set the mode for which SelfCalibration is executed.
Set the time at which SelfCalibration is executed.
Procedure
1. Choose “SelfCal ibration” from the Adjustment menu, and press .
2. Choose “Sett ings” from “SelfCalibration”, and press .
3. Choose “Mode Selection” from “Set tings”, and press .
4. Use or to select the mode to change, and press .
5. Select “On” or “Off ” with or .
6. Press to exit.
Note
• When “Ot her Modes” is set to “On”, the monitor color reproduction a rea is updated and the display in ea ch color
mode will be adjusted as follows:
- In any mode ot her than CAL mode, the temperat ure is adjusted so that it is as close as po ssible to the specied
value.
- In Adobe RGB/sRGB/EBU/REC709/SMPTE- C/DCI modes, the gamut values ar e adjusted so that they are close to
each specied value.