21
Chapter2AdjustingScreens

2-3. Adjusting Color

When displaying in Standard Mode, t he “Color” menu of the Adjustment menu allows you to set and save
independent color adjustments for each mode.
Attention
• It ta kes about 7 minutes (under our measur ement conditions) for the performance of elect rical parts to stabili ze. Please wait
7 minutes or more after the mon itor power has been turned on , and then adjust the monitor.
• The s ame image may be seen in different c olors on multiple monitors due to their monitor-spe cic characteristics. Ma ke ne
color adjustment visually when mat ching colors on multiple monitors.
Note
• The va lues shown in “cd/m2”, “K” or “%” are available only as reference.
●To adjust brightness
The screen brightness is adjusted by cha nging the brightness of the backlight (light sour ce from the LCD back
panel).
Setting Range
50cd/m2 to 300 cd/m2
Procedure
1. Pre ss or .
The Brightness menu appea rs.
2. Use or for adjustment.
3. Pre ss to exit.
Attention
• If t he entered value cannot be set, the value w ill appear in magenta. In su ch a case, change the value.
Note
• Alte rnatively, you can use “Brightness” under “C olor” in the Adjustment menu to adjust it.