16 Chapter2AdjustingScreens
●To switch signal formats
The monitor’s displayable resolution can be changed. Use this function in the following cases.
• DVI: When displaying a dedicated resolution and vertical s can frequency for Single Link
• HDMI: When displaying PC signals
Adjustable Range
• DVI: Dual Link / Single Link
• HDMI : Video / PC
Procedure
1. Pre ss to turn off t he monitor.
2. Holding down, press for at least two seconds to turn on the mon itor.
The “Optional Settings” me nu appears.
3. Choose “ Signal Selection” from “Optional Settings”, and press .
4. Choose t he input signal to set with or , and press .
5. Select “Signal For mat” with the selected input signal and press .
6. Switch the sig nal format with or .
7. Select “Finish” wit h or .
8. Pre ss .
●To display 4K signals by DisplayPort signal input
When using DisplayPort signal input, 4K signals (resolutions of 3840 × 2160 and 4096 × 2160) can be reduced
and displayed on full screen.
Procedure
1. Pre ss to turn off t he monitor.
2. Holding down, press for at least two seconds to turn on the mon itor.
The “Optional Settings” me nu appears.
3. Choose “ Signal Selection” from “Optional Settings”, and press .
4. Select “DisplayPort ” from “Optional Settings”, and press .
5. Select “Signal Ba ndwidth”, and press .
6. Switch the set ting with or .
Select “4K” to enable display of 4K signals.
7. Select “Finish” wit h or .
8. Pre ss .
Note
• W hen displaying 4096 × 2160 resolution signals, blank border s may appear at the top and bottom of the sc reen to
maintain the aspect r atio.