28 Chapter2AdjustingScreens

2-5. Specifying Color Space

The color space of the input signal can be specied. Set to ot her than “Auto” if this product cannot display correct
color.
Settings Function
Auto Identiesthecolorspaceoftheinputs ignalautomatically.
YUV4:2:2 Convertsthecolorspaceoftheinputsi gnaltoaYUV4:2:2format.
YUV4:4:4 ConvertsthecolorspaceoftheinputsignaltoaYU V4:4:4format.
RGB Convertsthecolorspaceoftheinp utsignaltoanRGBformat.
Procedure
1. Choose “ Screen” from the Adjustment menu, and press .
2. Choose “Color Space” f rom “Screen”, and press .
3. Select “Auto”, “YUV 4:2:2”, “YUV 4:4:4”, or “RGB” with or .
4. Pre ss to exit.
Attention
• The s etting is required when a DVI devic e is connected to the monitor (at the HDMI con nector port) using the DVI-
HDMI conversion connector.
• Even if “Auto” is set, correc t color might not be displayed.
Note
• The c olor space at the DVI input is converted to an RGB format.
• See ” 2-6. Expanding Signal Output R ange” (page 28) to set the range of input signals.

2-6. Expanding Signal Output Range

●To extend the output range
Theoutputrangeofthesignalisextendedto0-255fordi splay. When images are displayed in black and white
within the restricted r ange for purposes such as image creation, use thi s setting to improve the contrast of the
images.
Settings Function
On Theoutputrangeofthesignalisextendedto0-255fo rdisplay.
Off Thesignaloutputrangeisnotextend ed.
Auto Themonitorautomaticallyrecognizest hebrightnessrangeofinputsignalsanddisplays
imagesappropriately(recommended).
Procedure
1. Choose “ Screen” from the Adjustment menu, and press .
2. Choose “ Range Extension” from “Screen”, and press .
3. Choose “ Range Extension” from “Range Extension”, and press .
4. Select “On”, “Off ”, or “Auto” with or .
Attention
• W hen the DVI signal is input, “Auto” cannot be selected.
5. Pre ss to exit.