32 Chapter3SettingMonitor
3-2. Skipping Unused Display Modes
This function selects / deselects mode s that should be skipped. Please use this function if you would like to p revent
a mode from being used.
Procedure
1. Choose “ Tools” from the Adjustment menu, and press .
2. Choose “ Mode Skip” from “Tools”, and press .
3. Use or to select the mode t o change, and press .
4. Select “-” or “Skip” with or .
5. Pre ss to exit.
Attention
• You cannot set all t he modes “Skip”. Set at least one mode to “-”.
Note
• Available CAL modes di ffer depending on each input signa l by factory settings.
3-3. Showing and Hiding the EIZO Logo
When the monitor is turne d on, the EIZO logo appears on the screen. You can choose to show or hide the display of
the EIZO logo.
Procedure
1. Pre ss to turn off t he monitor.
2. Holding down, press for at least two seconds to turn on the mon itor.
The “Optional Settings” me nu appears.
3. Choose “L ogo” from “Optional Settings”, and press .
4. Select “On” or “Of f” with or , and press .
5. Select “Finish” wit h or .
6. Pre ss .
3-4. Locking Operation Buttons
This function allows you to lock the setti ngs status to prevent changing them.
Procedure
1. Pre ss to turn off t he monitor.
2. Holding down, press for at least two seconds to turn on the mon itor.
The “Optional Settings” me nu appears.
3. Choose “ Key Lock” from “Optional Settings”, and press .
4. Choose “Of f”, “Menu”, or “All” with or , and press .
Settings Buttons that can be locked
Off(Defaultsetting) None(Allbuttonsar eenabled)
Menu button
All Allbuttonsexcluding
5. Select “Finish” wit h or .
6. Pre ss .