29
Chapter2AdjustingScreens
●To select the range of signals to extend
The method for extending signals can be selected by t urning the “Super white” sett ing “On” or “Off”.
Settings Function
On Theoutputrangeofthesignalisextendedfro m16-254to0-255fordisplay.
Off Theoutputrangeofthesignalisexten dedfrom16-235to0-255fordisplay.
Procedure
1. Choose “ Screen” from the Adjustment menu, and press .
2. Choose “ Range Extension” from “Screen”, and press .
3. Choose “ Super White” from “Range Extension”, and press .
4. Select “On” or “Of f” with or .
5. Pre ss to exit.
.Attention
• If “R ange Extension” is turned “Of f”, the setting can be change d but the change will not be applied.

2-7. Setting HDMI

●To reduce noise
The small noises that occur in da rk images are reduced. Use this function to re duce noise and roughness in
images.
Procedure
1. Choose “ Screen” from the Adjustment menu, and press .
2. Choose “ HDMI Settings” from “Screen”, and press .
3. Choose “ Noise Reduction”, and press .
4. Select “On” or “Of f” with or .
5. Pre ss to exit.
Attention
• Using th e Noise Reduction function may deter iorate ne images.
• For interla ce signals, the setting value ca n be changed but this function doe s not work.
●To select how to display interlace signal
The display method can be selected before the interlace signa l is displayed.

To identify video images automatically and converting them to suitable images

Signals of 24 frames or 30 frames per second for im ages such as movies, computer graphics, and animation s
are automatically identied and the most suita ble images are displayed.
Procedure
1. Choose “ Screen” from the Adjustment menu, and press .
2. Choose “ HDMI Settings” from “Screen”, and press .
3. Choose “ Film Detection”, and press .
4. Select “On” or “Of f” with or .
5. Pre ss to exit.
Attention
• If di storted images are displayed whe n “Film Detection” is “On”, set “Film Detection” to “Of f”.