33
Chapter3SettingMonitor
3-5. Changing DUE (Digital Uniformity Equalizer) Setting
The DUE setting can be changed.
Settings Function
Brightness Makesthebrightnessandc olorofthewholescreenuniformwitho utchangingthemaximum
brightnessandcontrastratio.Thebri ghtnessofahighgradationareaisnotcorrec ted.Select
thissettingtoprioritizethelevelsofthebr ightnessandcontrastovertheuniformit yinthehigh
gradationarea.
Uniformity Makesthebrightnessandc olorofthewholescreenuniform.Thebr ightnessofahighgraduation
areaisalsocorrectedsoitisuniform.S electthissettingtoprioritizetheuni formityoverthelevels
ofthebrightnessandcontrastinthehighgr adationarea.
Attention
• To change the DUE set ting, the adjusted monitor display mu st be readjusted. Perform the ta rget adjustment and correlation
again using ColorNavigator. For details, refer to the ColorNavigator Use r’s Manual (on the CD-ROM).
Procedure
1. Pre ss to turn off t he monitor.
2. Holding down, press for at least two seconds to turn on the mon itor.
The “Optional Settings” me nu appears.
3. Choose “DU E Priority” from “Optional Sett ings”, and press .
4. Select “Unifor mity” or “Brightness” with or , and press .
5. Select “Finish” wit h or .
6. Pre ss .