42 Chapter5
5-1. To switch among input signals
The input signal switches each time is pressed.
When the signal is switched, the active input p ort name appears at the top right corne r of the screen.
5-2. To set input signal selection
Settings Function
Auto Themonitorrecognizestheconnec torthroughwhichsignalsareinput.
Whenanexternaldeviceentersthepowersavingmo de,themonitorautomaticallydisplays
anothersignal.
Manual Themonitordisplaysthesignalfromthesele ctedconnectordespitethesignalinput.Selec t
theinputsignalfordisplayusingthe operationbut ton.
Procedure
1. Choose “ Tools” from the Adjustment menu, and press .
2. Choose “I nput Selection” from “Tools”, and press .
3. Select “Auto” or “Manual” with or .
4. Pre ss to exit.
Note
• W hen “Auto” is selected for “Input Selection”, the monitor’s power saving function works only when a ll external
devices are in the power saving mode.
5-3. Skipping Unused Input Signals
This function allows skipping of the set input sign als when the input signals are switched.
Procedure
1. Choose “ Tools” from the Adjustment menu, and press .
2. Choose “ Mode Skip” from “Tools”, and press .
3. Use or to select the mode t o change, and press .
4. Select “-” or “Skip” with or .
5. Pre ss to exit.
Attention
• You cannot set all t he modes “Skip”. Set at least one mode to “-”.