2 IMAGING ADJUSTMENT

- Screen menu -

All of the icons shown in the ScreenManager 'Screen' menu are described below.

•Allow the monitor to stabilize for at least 30 minutes before making image adjustments.

Brightness, Contrast, Size, Position

These functions are used to adjust the brightness, contrast, size and position of the screen. For more information about how to adjust each of them, please refer to the 'Quick Setup Guide', page 8.

Geometry, Tilt

Image distortion and/or tilting may be caused by the earth's magnetic field. Use the 'Screen' menu’s geometry (Side-Pincushion, Side-Pin Balance, Trapezoidal, Parallelogram) and/or tilt adjustment functions to correct any distortion.

Image distortion and tilting may also be caused by a device that is generating a magnetic field. If the above adjustments are not effective, try the following approaches.

•Check to see if there are any nearby interfering electronic devices such as another monitor, an electric motor, or a speaker (other than an optional EIZO i·Sound speaker unit). If so, move the device or move the monitor.

•It is sometimes possible to correct distortion or tilting by reorienting the monitor.

8 2 IMAGING ADJUSTMENT