NUTEK System

1)First make the appropriate ScreenSaver settings (Macintosh/Energy Saver) for the PC.

2)Then select ‘NUTEK’.

3)Set the delay time, which is the interval between the time that the ScreenSaver (Macintosh/EnergySaver) blanks the screen and the time that the monitor enters Mode 1.

4)Set the Mode 1 duration time which is the user definable time (0-60 minutes) before the monitor enters Mode 2.

NUTEK power-saving method

Mode 1 operates for a user-definable period in ‘Duration’ (in 0-60 minutes) before the monitor enters Mode 2. If the keyboard or the mouse are not in use during this period, the monitor will then enter PowerManager Mode 2.

18 4 POWER-SAVE SETUP