5)“Out of range” error message appears.

(Example)

•Use the graphics board’s utility software to change

the frequency setting. (Refer to the manual of the

E

graphics board.)

 

 

•Whenever an error signal message appears, the signal frequency will be displayed in red.

•Error messages will remain on the screen for 30 seconds, and then disappear. An error message may not appear at all if the signal frequency is extremely high or extremely low.

Imaging problems

1)Display size and/or position is incorrect.

2)• The image vibrates on the screen.

•A slight shaking movement of the screen image or text.

•Press the AUTO-SIZING button on the front panel. See Quick Setup Guide, page 8.

•Adjust the image size and/or position using the icons in the ScreenManager 'Screen' menu. See page 10.

•Use of the “moiré reduction” feature may cause a slight vibration. To eliminate the vibration, switch the feature OFF or reduce the moiré reduction level. See page 11.

•Check that the signal cable is properly connected to the graphics board or PC.

•Check that the graphics board is correctly mounted in the PC.

•The signal cable might be damaged. Please contact the dealer.

•The monitor may be located close to a device that is generating a magnetic field. Such devices include speakers (other than the EIZO optional i·Sound speaker), electric motors, high-voltage cables, and other monitors. It may be solved by switching off or moving the interfering device, or by relocating the monitor.

7 TROUBLESHOOTING 25