Design Beam 1200C™
©Elation Professional® 17 Design Beam 1200C™
Clamp Mounting
The Design Beam 1200C™ provides a unique mounting bracket assembly that integrates
the hanging yoke as well as the safety ca ble rigging point in one unit (see the illustration on
the next page). When mounting this fixture to truss be sure to secure an appropriately rated
clamp to the hanging yoke using a M10 screw fitted through the center hole of the hanging
yoke. As an added safety measure be su re to attached at least one properly rated safety
cable to the fixture using on of the safety cable rigging p oint integrated in the bracket
assembly
Securing the Design Beam 1200C™
Regardless of the rigging option you choose for your Design Beam 1200C™ always be sure
to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a
safety cable on the hanging bracket as illustrated above. Be sure to only use the designated
rigging point for the safety cable and never secure a safety cable to a carrying handle.