Design Beam 1200C™
©Elation Professional® 29 Design Beam 1200C™
No DMX Status – Th is function dictates how the fixture will function if it looses DMX
signal during normal operation. The default function is set to hold, in which the fixture
will lock into the last DMX signal it received and remain in that position until it is turned
off or begins receiving a new DMX signal. If the fixture is turned on without any DMX
signal, the fixture will automatically go in to sound-active mode. Available settings are:
“Close” – Shutter flags will close. “Hold” – Fixture will remain at it’s last settings. “Auto”
– Fixture will go into stand-alone mode, running the built-in program. “Music” – The
fixture will go into sound-active mode.
Pan Reverse - This function allows you to invert all pan movements. Use the Up and
Down buttons to turn this function On and Off. Press the Enter button to accept the
change or the Mode button to cancel and return to the main menu.
Tilt Reverse - This function allows you to invert all tilt movements. Use the Up and
Down buttons to turn this function On and Off. Press the Enter button to accept the
change or the Mode button to cancel and return to the main menu.
Pan Degree – This function changes the maximum Pan resolution from eithe r 540˚ or
630˚. The default function is 540˚.
Feedback – This function turn s the feedback correction on or off. This function is set
to on as default.
Movement Speed – This function changes the order of the DMX channels to more
closely mat ch similar fixtures from different vendors, thus allowing the user ea sier
functionality when programming. There are four different mode variations.
Mic Sensitivity – This function make the internal microphone more or less sensitive to
sound. This function only works in conjunction with the sound active modes. The
default setting is 70% and setting range from 0 % to 99 %.
10.4.2. Service Settings – These adjustments and settings should only be performed by a
technician familiar with the functionality this fixture. Incorrect setting of these
functions may result reduced performance or damage to the fixture.