Design Beam 1200C™
©Elation Professional® 27 Design Beam 1200C™
L-Timer Password
Use this function to enter the “Clear Lamp Time” password. Password is “038”
Clear Lamp Time
This function will allow the “Lamp Run Hours” function be cleared and reset.
This function resets the lamp “ON” time to zero. Please reset the lamp “ON” time at
every lamp replacement. This procedure tracks the lamp running time so the lamp
can be replaced at the end of it’s recommended duty cycle.
10.2.2. Temp. Info.
Head Temp – This function will display the head temperature of the fixture.
10.2.3. Product Info.
Software version - This function will display the current operating software version
of the fixture.
• Select “Software Version” in the system menu.
• Press enter to confirm.
• The LCD will read “V-X.X”, “X.X” represents the version number, e.g. “V-1.0”,
“V-2.6”.
• Use the UP and DOWN buttons to toggle through the software version of
different IC’s.
• Press the Mode/Esc-button to return to the main menu.
10.3.1. Lamp on/off
With this function you can switch the lamp on or off via the Control Board.
• Select "Lamp on/off" by use the “UP” and “DOWN” controls and press “ENTER”.
• Select “ON” if you wish to strike the lamp or “OFF” to switch it off.
• Press “ENTER” to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
10.3.2. Automatic La-On
This function is on by default. With this function you can select if the lamp will be