Design Beam 1200C™
©Elation Professional® 22 Design Beam 1200C™
9. FIXTURE MENU On-Board System Menu: The Design Beam 1200C™ comes with an easy to navigate
system menu. This next section will detail the functions of each command in the system
menu.
LCD Control Panel: The control panel located on the side of the fixture allows you to
access the main menu and make necessary adjustments to the Design Beam 1200C™.
During normal operation, tapping the “MODE/ESC” key once will access the fixture’s main
menu. Once in the main menu you can navigate through the different functions and access
the sub-menus with the Up and Down buttons. Once you reach a f ield th at requires
adjusting, tap the ENTER button to activate that field and use the UP and Down button to
adjust the field. Tapping the Enter button once more will confirm your setting. You may exit
the main menu at any time without making any adjustments by tapping the MODE/ESC
button.
To access display Menu via the internal battery, press the UP & DOWN buttons
simultaneously. Display will automatically switch off after 20 seconds from last button press.
Function Mode
Set DMX Address
Value Display
Set To Slave
Auto Program
Music Control
A001~AXXX
PAN…
Slave1, Slave2, Slave3
Master / Alone
Master / Alone
DMX address setting
DMX value display
Slave setting
Auto program
Music control
Information
Time Information Current Time
Total Life Hours
Last Run Hours
Lamp Hours
Lamp Off Time
Timer Password
Clear Last Run
L-Timer Password
Clear Lamp Time
XXXX (Hours)
XXXX (Hours)
XXXX (Hours)
XXXX (Hours)
XXXX (Minute)
Password=XXX
ON/OFF
Password=XXX
ON/OFF
Power “ON” running time
Total fixture running time
Last operation run time
Lamp run time
Lamp off time
Timer Password (038)
Clears the fixture current
run time (Last Run Hours)
Lamp Password (038)
Resets lamp run time
Temperature Info Head Temperature XXX C˚/F˚ Head Internal Temperature
Software Version Ver 1.1…. Displays the fixture’s
current software version