Design Beam 1200C™
©Elation Professional® 31 Design Beam 1200C™
page 37 for more information on operating this fixture via Wireless DMX.
10.4.8. Reset Default - With this fu nction you can restore the original factory settings. All
settings will be set back to the default values (shaded). All user edited scenes will be
lost.
10.5.1 Reset All: This function will reset all inte rnal motors to the home position.
10.5.2 Reset Pan and Tilt: This function will only reset the pan and tilt motors to the home
position.
10.5.3 Reset Colors: This function will only reset the color wheel and the CMY filter motors
to the home position.
10.5.4 Reset Gobos: This function will only reset the gobo wheels.
10.5.5 Reset Shutter: This function will only reset the blackout shutter to the home
position.
10.5.6 Reset Others: This function will reset all other motors that are not associated with
the previous reset functions to the home position.
10.6.1 Test Channel – This menu function allows the user to select each individual fixture
channel and test it’s function independently from the control board.
10.6.2 Manual control – This function read ies the fixture for lamp optimization in a simple
single step procedure. This function will center the pan and tilt motors while at the
same time open the shutter and bring the dimmer to 100%. The pan and tilt function
will still operate if the fixture needs to be positioned to a flat clear surface.
10.6.3 Calibrate values – This function should only be performed by a qualified technician.