Design Beam 1200C™
©Elation Professional® 7 Desi gn Beam 1200C™
2. SAFETY INSTRUCTIONS The Design Beam 1200C™ is an extremely sophisticated piece
of electronic equipment. To guarantee a smooth o peration, it is
important to follow the guidelines in this manual. The
manufacturer of this device will not accept responsibility for
damages resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.
1. Always be sure that the fan and the a ir inlets remain clean and are never blocked.
Allow about 6” (15cm) between this fixture and other devices or a wall to allow for
proper cooling.
2. Never touch the fixture during normal operation. This can cause severe personal
injuries and/or damage to the fixture.
3. Be sure to unplug the Design Beam 1200C™ from the power outlet before
performing any service related issues.
4. Lamp Replacement; Please wait at least 15 minutes after disconnecting the main
power before you open the Design Beam 1200C™. To prevent person al injury,
never touch the lamp if you are not absolutely sure it has cooled.
5. Never look directly into the lamp beam. You risk injury to your retina, which may
induce blindness.
6. Be sure to track and record the lamp running time. The lamp should be changed at
the end of the specified lamp life, regardless of lamp output. You may also have to
change the lamp if it sh ows any deformations or damage. The same is with all
glass components, color filters, lenses and mirrors.
7. For safe operation, follow the Installation guide described in chapter five of this
manual. Operating the Design Beam 1200C™ without suited safety aids such as
safety cables or clamps can increase the risk of damage and/or personal injury.
8. Qualified and certified personnel should only perform installation.
9. When mounting this fixture, use only the original rigging parts included with this
fixture. Any structural modification will void the original manufactures warranty and