Operating Instructions
25
Automatic Switching On and Off
For automatic switching on and off, both the cook time and the end
time must be entered. In the following instructions, the cook time is set
first and then the end time. The settings can however be made in the
reverse order.
0 1. If necessary, switch on the appliance using the mains button.
2. Select oven function. If necessary, change the suggested temperature.
3. Press the clock W button as many times as necessary until the function
indicator is at COOK TIME.
The temperature/time display indicates “0.00“.
4. Within 5 seconds, press the + button until the required cook time is
displayed.
5. Press the clock W button until the function light is at END TIME.
The temperature/time display shows the calculated end time if cooking
were to start immediately.
6. Within 5 seconds, press the + button until the required end time is
displayed.
After approx. 5 seconds, the function indicator switches from flashing
to continuous illumination.
Both the COOK TIME and END TIME function indicators have now swit-
ched to continuous illumination. The clock is now set to switch the
oven on and off automatically.
The oven switches on automatically at the calculated start time. When
the end time is reached, the oven switches off automatically and an
acoustic signal sounds for approx. two minutes.
7. Press the clock W button to switch off the signal.
8. If necessary, switch off the appliance using the mains button.
Checking Automatic Programme Entries
0 Using the clock W button, select the COOK TIME or END TIME function.
The corresponding function indicator starts to flash.
The “Temperature/Time Display“ indicates the remaining cook time or
the end time entered.