Operating Instructions
53

Catalytic liners

The oven is supplied with a catalytic ceiling, catalytic side panels and a
catalytic back panel.
Catalytic liners are self cleaning and will destroy splashes of food and
fats while the oven is on. To aid this process and to ensure continued
good performance of the liners, we recommend you run the oven, wit-
hout food, once a week.
0 1. Empty the oven including the wire shelf support grids.
2. Set the temperature at 250 °C.
3. Switch off the oven after 1 hour.
1 Attention: Manual cleaning of the catalytic liners is not recommended!
Damage will occur if oven sprays or abrasives of any kind are used.
3 Slight discolouration of the catalytic surfaces may occur in time. This
does not affect the catalytic properties in any way.
Additonal and replacement catalytic panels are available as an optional
extra. Please refer to the chapter Special accessories.

Assembly

1 Important: The surface of the catalytic panels is prone to scratches!
Important: To prevent damage the grill heater element must not be
folded down using force.
0 Prior to fitting the catalytic panels, remove the side rails. (See Section:
Cleaning and Care)