Door Reversal 17
3Remove top hinge (3 screws), reinstall hinge screw pin, and remount on opposite side BOTTOM (see Figure 17).
4Remove the two door closer inserts from the existing bottom hinge and install as shown on the new bottom hinge (see Figure 18).
5Remove existing bottom hinge (3 screws) and remount on opposite side TOP. Remove hinge screw pin.
6With bottom of door facing up, remove pivot plate (2 screws), flip over, and remount on opposite side of door (see Figure 19).
7Holding door upright with top of door tilted forward, place hole of door pivot plate on bottom hinge screw pin (see Figure 20). Be sure that the bosses on the closers align with holes in hinge and hinge plate.
8Tilt top of door into position in top hinge and install top hinge screw pin.
9In empty hinge holes, install plastic screw plugs (3 top and 3 bottom) and door hole plug (1,door top) removed in step 2.
HINGE 
SCREW
PIN
Figure 17 | UL313 |
DOOR 
CLOSER
INSERTS
Figure 18 | BOSS |
UL312 | |
Figure 19 | UL319 |
|
Figure 20
BOSS
CLRCO008
