DoorAdjustment 19
4If door edge opposite the hinges needs to move up, move plate toward outside of door. If door edge needs to move down, move plate toward inside of door (see Figure 23). Repeat until top edge of door is parallel with top of cabinet and tighten screws securely.
5After adjustment is complete, remove the door closers from the bottom hinge, clean thoroughly and apply petroleum jelly to the mating surfaces of the closers (see Figure 24). Be sure that bosses on closers align with holes in hinge and hinge plate. Mount door and install top hinge pivot pin.
Figure 23
SLOTTED | NOTCH | |
MOUNTING | ||
| ||
HOLES |
|
RAISE | LOWER |
OUTSIDE | OUTSIDE |
DOOR EDGE | DOOR EDGE |
CLRCO001a
DOOR 
CLOSERS
| BOSS |
Figure 24 | UL312 |
