Electrolux E15IM60E manual Start-up, Initial START-UP

Start-up 21

INITIAL START-UP

Once installation and leveling is complete, the unit is ready for initial start-up and operation. Your unit is shipped in the OFF position, however, you may turn it ON/ OFF using the cycle selector switch located in the access panel above the grille (see Figure 26).

1Plug the appliance cord into a 115V polarized and grounded electrical outlet.

2Open the water supply valve in the main water source.

3Place the cycle selector switch in the ON position. The water fill valve will energize and fill the water reservoir. The water fill valve shuts off after 180 seconds. The compressor begins to operate and water flows over the evaporator assembly (ice cube tray).

4Upon initial start-up, water flow over the evaporator may be uneven. This may cause uneven sized cubes or water spilling into the ice storage bin. This is a normal situation and will correct itself within the first 24 hours of operation. After the initial start-up period, the water will cascade evenly over the evaporator.

Figure 26

C	O	O
L	F	N
N	F

CYCLE

SELECTOR SWITCH

C	O	O
L	F	N
N	F

IMPORTANT

It is possible that dirt or scale will dislodge in the water line. Always throw away all ice cubes made during the first two to three hours of operation.