18electrolux
CARE AND CLEANING
Warning! Refer to "Safety information" chapter.
•Clean the front of the appliance with a soft cloth with warm water and cleaning agent.
•To clean metal surfaces use a usual clean- ing agent
•Clean the oven interior after each use. Thus you can remove dirt more easily and it does not burn on.
•Clean stubborn dirt with a special oven cleaner.
•Clean all oven accessories (with a soft cloth with warm water and cleaning agent) after each use and let them dry.
•If you have nonstick accessories, do not clean them using an aggressive agents, sharp edged objects or dishwasher. It can destroy nonstick coating!
Catalytic walls
The walls with a catalytic coating are self- cleaning. They absorb fat which collects on walls while the oven operates.
To support this
•Turn the oven light on.
•Remove accessories from the oven.
•Select an oven function.
•Set the oven temperature to 250 °C and let oven operate for 1 hour.
•Clean the bottom of the cavity with a soft and damp sponge.
Do not clean the catalytic surface.
Discolouration of the catalytic surface has no effect on catalytic properties.
Aluminium base plate
•clean the aluminium base plate after each use with a soft brush and warm water and cleaning agent;
•never use abrasive cleaning agents or sponges, sharp objects, stain removers to clean the aluminium base plate;
•with stubborn dirt soak the aluminium base plate in warm water and soap suds;
•do not clean the aluminium base plate in dishwasher;
•when cleaning use a flat surface to pre- vent the aluminium base plate from defor- mation;
Shelf Support Rails
Removing the shelf support rails
1.Pull the front of the shelf support rail away from the side wall.
2.Pull the rear shelf support rail away from the side wall and remove it.
2
1
Installing the shelf support rails
Install the shelf support rails in opposite se- quence.
Important! The rounded ends of the shelf support rails must point to the front!
Fat trap
Warning! Before you remove the fat trap deactivate the appliance. Make sure that the appliance is cold.
There is a risk of burns!
The fat trap almost do not need mainte- nance actions. However, if you frequently prepare very fatty foods a residues may oc- cur.
Removing the fat trap:
1.Pull the top heating element out of the plug connection to the front.