20electrolux
1.Hold the heat element with two hands at the front.
2.Pull the heating element out of the plug connection to the front.
3.Reassembly in reverse order. Make sure the heating element has a good fit in the connecting socket when in- serting.
Oven door
To clean the oven door remove it.
Caution! Be careful when you remove the door from the appliance. The door is heavy!
Removing the oven door
1.Open the oven door as far as it goes.
2.Lift up clamping levers (A) on the two door hinges fully.
A
A
3. Close the oven door until the first posi- tion (angle approximately 45°).
4.Hold of the oven door with one hand on each side and pull it away from the oven at an upwards angle.
Put the oven door with the outer side down on a soft and level surface to pre- vent scratches.
Hanging the oven door back on its hinges
1.Hold of the oven door with one hand on each side and hold at an angle of ap- proximately 45°.
Position the recesses on the bottom of the oven door on the hinges on the oven. Let the door slide down as far as it will go.
2.Open the oven door as far as it goes.
3.Fold down the clamping levers (A) on the both door hinges back into their orig- inal positions.
