Electrolux EMS2685 manual Setting The Clock, Before Operation

Plug in the oven.

1.The oven display will flash:

2.Press the STOP button, the display will show:

x1

BEFORE OPERATION

Using the STOP button

Use the STOP button to:

1.Erase a mistake during programming.

2.Stop the oven temporarily during cooking.

3.Cancel a programme during cooking, touch twice.

3.To set the clock, see below.

4.Heat the oven without food. (See page 16 note 2).

SETTING THE CLOCK

There are two setting modes: 12 hour clock and 24 hour clock.

1.To set the 12 hour clock, hold the COOKING MODE button down for 3

seconds. will appear in the display.

2.To set the 24 hour clock, press the COOKING MODE button once more

after Step 1, in the example below will appear in the display.

To set the clock, follow the example below.

Example:

To set the 24 hour clock to 23:35.

x1 and hold for 3 secs.

1.	Choose the clock function.	Choose the 24 hour	2. Set the hours. Rotate the TIMER/WEIGHT/
	(12 hour clock).	clock.		POWER knob until the correct hour is
				displayed (23).
	x1 and hold for 3 seconds	x1
3.	Press the COOKING	4. Set the minutes. Rotate the		5. Press the COOKING
	MODE button to change	TIMER/WEIGHT/POWER		MODE button to start
	from hours to minutes.	knob until the correct minute is		the clock.
		displayed (35).

x1 x1

NOTES:

1.You can rotate the TIMER/WEIGHT/POWER knob clockwise or counter-clockwise.

2.Press the STOP button if you make a mistake during programming.

3.If the electrical power supply to your microwave oven is interrupted, the display will intermittently

show after the power is reinstated.

If this occurs during cooking, the programme will be erased. The time of day will also be erased.

4.When you want to reset the time of day, follow the above example again.

7