EMAK RIDING MOWER 3.UNPACKING AND ASSEMBLY, 3.1 UNPACKING, 3.2 FITTING THE STEERING WHEEL, In addition ( ➤ in the electric start models):

EN 8 UNPACKING AND ASSEMBLY

3.UNPACKING AND ASSEMBLY

IMPORTANT The machine is supplied without engine oil or fuel. Before starting up the engine, fill with oil and fuel following the instructions given in paragraph 5.3.3. and in the engine manual.

For storage and transport reasons, some components of the machine have to be assembled after their removal from the packing. Final assembly is carried out by following these simple instructions.

3.1 UNPACKING

When unpacking the machine, take care to gather all the individual parts, fittings and documentation.

NOTE o avoid damaging the cutting deck when getting the machine

down from the pallet, take it to the maximum height and be very careful.

The supply includes:

–bolts and screws, necessary for completing the assembly

–a syringe for draining the engine oil

In addition ( ➤ in the electric start models):

–a battery charger

–2 starter keys

–a spare 6.3 A fuse, to be kept in case of

necessity.

3.2 FITTING THE STEERING WHEEL
Put the machine on a flat surface and straight-	1
en up the front wheels.
1. fit the bellows (1) onto the column (2);	5
2. fit the steering wheel and its column (2)	2
	4
onto the protruding shaft (3) and fasten it	5
with the screws (4) and nuts (5) supplied,
using both holes on the shaft (3).
	3