EN 16

HOW TO USE THE MACHINE

a)The engine must only be started in the following conditions:

– the transmission is in “neutral”;

– the blade is not engaged;

– the operator is seated or the parking brake is engaged. (➤ Only for machines with B&S engine)

b)The engine stops when:

–the operator leaves his seat when the blade is engaged;

–the operator leaves his seat with a gear engaged;

–the grass-catcher is lifted without disengaging the blade;

–the blade is engaged without the grass-catcher in place;

–the parking brake is engaged without disengaging the blade. (➤ Only for machines with B&S engine)

5.3 PRELIMINARY OPERATIONS BEFORE STARTING WORK

These controls ensure that the work gives the best results and is done in maximum safety.

5.3.1SEAT ADJUSTMENT

Adjust the seat by sliding it along the bracket slots.

1.Loosen the four screws (1);

2.once you have found the right position, se- curely tighten the four screws (1).

5.3.2TYRE PRESSURE

1

1

Having the correct tyre pressure is essential for ensuring that the cutting deck is perfectly horizontal and thus mows evenly.

1. Unscrew the valve caps;

2. connect a compressed air line with a gauge to the valves and check that the pressure is:

–

Front tyres

1.8 bar

–

Rear tyres

1.3 bar

3. screw the valve caps back on.