EMAK RIDING MOWER 2

Contents

Page Page INTRODUCTION TABLE OF CONTENTS 1.SAFETY 1.2SAFETY REGULATIONS (read carefully before using the machine) 1.3 SAFETY LABELS 2.IDENTIFICATION OF THE MACHINE AND COMPONENTS Collector channel: Grass-catcher: Engine: Batteria Driver seat: 3.UNPACKING AND ASSEMBLY 3.3 FITTING THE SEAT 3.4 FITTING THE BLADE ENGAGEMENT LEVER 3.5CONNECTING THE BATTERY ( ➤ sonly in the electric start models): CONNECTING THE BATTERY 3.6 FITTING THE GRASS-CATCHER 4.CONTROLS AND INSTRUMENTS stopped ➤Only for machines with Tecumseh engine: ➤In the electric start models ➤In the manual start models 4.22 A 5.HOW TO USE THE MACHINE Only for machines with B&S engine) 5.3 PRELIMINARY OPERATIONS BEFORE STARTING WORK Page Never use the machine without having fitted the exit protection Wear strong gloves when handling the blade 5.4 USING THE MACHINE ➤ In the manual start models electric start) manual start) NOTe When cutting on sloping ground, the forward speed must be reduced to ensure safe conditions ( ☛ 1.2 - 5.5) This job must only be performed with the engine turned off ➤In the electric start models: Always take out the ignition key before leaving the machine unattended ➤In the manual start models: Page 5.5 USING ON SLOPES max 10° - 17% RIGHT Reduce the forward speed before going on a slope, particularly downhill 5.6 TRANSPORTING 5.7 ADVICE ON HOW TO OBTAIN A GOOD CUT 6.MAINTENANCE 6.2 ROUTINE MAINTENANCE 25 HOURS 6.2.3 ENGINE 6.2.5BATTERY ( ➤ Only in the electric start models) must con stant voltage 6.3 CHECKS AND ADJUSTMENTS TURER'S GENUINE REPLACEMENT BLADES BEARING THE SYMBOL When assembling Page Page 6.4 DISMANTLING AND REPLACEMENT Page 7.TROUBLESHOOTING models Page 8.ACCESSORIES ON REQUEST 9.SPECIFICATIONS