EN 30 | MAINTENANCE |
which is to be connected to the corresponding connector of the special “CB02” maintenance battery charger supplied.
IMPORTANT | This connector must |
|
only be used for connecting to the “CB02” maintenance battery charger. For its use:
–follow the instructions given in the rela- tive instructions manual;
– follow the instructions given in the battery manual.
6.3 CHECKS AND ADJUSTMENTS1
6.3.1DISMANTLING, SHARPENING AND BALANCING THE BLADE
A badly sharpened blade tears at the grass, reduces collection and makes the
lawn turn yellow. To dismantle the blade, hold onto it tightly using work gloves and | ||
loosen the two screws (1). |
| |
Sharpen the two cutting edges using a medi- | 1 | |
um grade grinding wheel and check the bal- | ||
| ||
ance by holding the blade up with a round 18 |
| |
mm Ø bar inserted in the central hole. |
| |
Always replace the damaged or bent blade; never try to repair it! ALWAYS USE MANUFAC-
TURER'S GENUINE REPLACEMENT BLADES BEARING THE SYMBOL
!When assembling,screw down the fixing bolts (1). If necessary, replace the nuts and bolts only with GENUINE SPARE PARTS.
Ø 18 mm