! WARNING!

UNPACKING AND ASSEMBLYEN 9

3.3 FITTING THE SEAT

2

 

1. Fit the seat (1) onto the plate (2) using the

 

screws (3).

3

 

 

3

 

1

3.4 FITTING THE BLADE ENGAGEMENT LEVER

1. Fit the end of the lever (1) on the projecting part of the pin (2) and fix it all by tightening the screw (3) and nut (4).

1

4

3 2

3.5CONNECTING THE BATTERY ( ➤ sonly in the electric start models):

The battery (1) is situated under the seat.

 

 

 

 

1

1.

Connect the battery connector (2) to the

 

 

 

machine connector (3);

 

 

2.

recharge the battery by following the

 

 

 

instructions in the manual (☛ 6.2.5).

 

 

 

IMPORTANT

Never start the engine

 

 

 

until the battery is fully charged!

2

3

 

 

 

Follow the battery manufacturer's instructions regard- ing safe handling and disposal.