Emerson 3-9000-771A 1.6Meter specifications, Meter performance, Section 1: Introduction, Liquid meter specifications, Table 1-2Meter specifications

Section 1: Introduction	Daniel 3818 LNG Liquid Ultrasonic Meter Installation Manual
May 2012	3-9000-771 Rev A

1.6Meter specifications

Specifications for Daniel 3818 LNG Liquid Ultrasonic Flow Meters are below:

Table 1-2 Meter specificationsLiquid meter specifications

Meter type	Number of paths:
	•	Eight path (sixteen transducer) chordal design
	Ultrasonic type:
	• Transit-time based measurement
	• Spool piece with integral mount transducers
Meter performance
Linearity	•	± 0.15% of measured value over a 10:1 turndown
	• ± 0.20% of measured value over a 20:1 turndown
Repeatability	•	±0.02% of reading in the specified velocity range
Velocity range	•	2.0 fps (0.6 m/s) to 40.0 fps (12.2 m/s) (nominal) 48 fps (14.3 m/s) (over-range)
Upper Viscosity Limit	•	150 centipoise (Transducers LT-07)
Body and Flange Pressure	U.S. Customary Units - Meter size 30 (Raised face, RTJ or Companion)
rating range	•	Line sizes:
		—	30” (DN 900)
	• ANSI pressure classes (per ANSI B16.5):
		— 300 ANSI / PN 50
	• Body and flange material and temperature rating:
		— 316 Stainless steel (forged) body and flanges: (-196° C to 60° C)
	•	Maximum Pressures
		—	Dependent on operating temperature
	•	Minimum Pressures
		— 0 psig 0 barg
Flange types	•	Raised face for:
	•	ANSI class - 300
Specific Gravity	•	0.35 to 1.50
Accuracy Limits	•	Accuracy limits typically are:
		— ± 2% without a flow calibration

8 Meter specifications