Emerson 8712E manual Product Certifications, Approved Manufacturing Locations

Quick Installation Guide

00825-0100-4664, Rev BB January 2013

Rosemount 8712 / 8700 Series

PRODUCT CERTIFICATIONS

Approved Manufacturing Locations

Rosemount Inc. — Eden Prairie, Minnesota, USA

Fisher-Rosemount Technologias de Flujo, S.A. de C.V. — Chihuahua Mexico Emerson Process Management Flow — Ede, The Netherlands

Asia Flow Technology Center — Nanjing, China

European Directive Information

The EC declaration of conformity can be found on page 31. The most recent revision can be found at www.rosemount.com.

Type n protection type in accordance with EN 50021

• Closing of entries in the device must be carried out using the appropriate EExe or EExn metal cable gland and metal blanking plug or any appropriate ATEX approved cable gland and blanking plug with IP66 rating certified by an EU approved certification body.

CE Marking

Complies with EN 61326-1: 2006

Complies with Essential Health and Safety Requirements:

EN 60079-15: 2003

International Certificates

C-Tick Marking

Rosemount Inc. complies with the following IEC Requirements:

IEC 60079-0: 2004

IEC 60079-15: 2005-03

Hazardous Locations Certifications

North American Certifications

Factory Mutual (FM)

N0 Non-incendive for Class I, Division 2 Groups A, B, C, and D non-flammable fluids (T4 at 40 °C)

Dust-ignition proof Class II/III, Division 1 Groups E, F, and G

(T4 at 40 °C)

Hazardous Locations; Enclosure Type 4X, IP66

N5 Non-incendive for Class I, Division 2,
Groups A, B, C, and D flammable fluids
(T4 at 40 °C)
Dust-ignition proof Class II/III, Division 1
Groups E, F, and G
(T4 at 40 °C)
Hazardous Locations; Enclosure Type 4X, IP66	27
Requires sensors with N5 Approval