31.Using the 5/64” hex wrench (supplied), loosen the setscrew in the collar on the light kit adapter assembly. Then pass the connectors and the wires from the motor shaft through the collar (Figure 18A). Screw the adapter assembly onto the motor shaft and then tighten the setscrew to secure the adapter assembly to the motor shaft. Connect the connectors from the motor shaft using the jumper assembly (supplied). Verify that the connectors are securely engaged.
34.Install two candelabra base lamps in the sockets of the light kit adapter plate (Figure 20A):
Model CF2600 -
35.Position the glass shade over the threaded nipple in the light kit plate assembly (Figure 20A). Seat the glass shade evenly over the plate assembly and securely install the hex nut and finial nut (supplied) on the threaded nipple.
COLLAR
SETSCREW 
PHILLIPS HEAD 
SCREW (3)
LIGHT KIT
SOCKET
LIGHT KIT
ADAPTER ASSEMBLY
Figure 18A | JUMPER |
ASSEMBLY |
32.Securely connect the black wire from the light kit plate assembly to the blue wire from the motor shaft using a wire connector (supplied) (Figure 19A). Connect the white wire from the plate assembly to the white wire form the motor shaft using a wire connector (supplied).
WIRE
CONNECTORS
WHITE WIRES
LIGHT KIT | BLUE | |
WIRE | ||
PLATE ASSEMBLY | ||
|
BLACK
WIRE
Figure 19A
NOTE: When installing the light kit plate assembly, position the wires and wire connectors in the raised center portion of the plate assembly. Do not pinch wires between the light kit plate assembly and the adapter assembly.
33.Secure the light kit plate assembly to the light kit adapter assembly by threading three
PLATE ASSEMBLY
THREADED NIPPLE
GLASS
SHADE,
LOWER
HEX NUT
FINIAL
NUT
Figure 20A
9
