Installation
Figure 9 Rotate the operation and display panel
Operation and Display Panel
Rotated Clockwise 90 Degrees
c.Pull the logo on the front plastic bezel cover gently, rotate it 90 degrees clockwise and snap it back into position. The rotated front plastic bezel cover is shown in Figure 10.
d.Replace the front plastic bezel cover on the Liebert® GXT3™. At this point, the UPS operation and display panel and logo have been rotated 90 degrees clockwise, which provides upright viewing for users.
5.Place the Liebert GXT3 and any battery cabinets on the support bases. Each Liebert GXT3 needs two support assemblies, as shown in Figure 10.
Figure 10 Tower installation
| Liebert GXT3 | |
Liebert | UPS and | |
External | ||
GXT3 UPS | ||
Battery | ||
| ||
| Cabinet |
Operation and
Display Panel
Rotated for
Tower Operation
Support Bases
13